Do you want to install stacked stone in your home but don’t know where to begin? After all, it can be expensive to hire a professional, and not everyone has the budget for it. The great thing is that you can install stacked stone panels without the help of a professional.
Here are the top seven tips for flawlessly installing stacked stone tile backsplash like a pro.
1. Take Accurate Measurements
One of the top tips you must follow is to take accurate measurements. If you don’t do this, you will end up wasting a lot of stacked stone and other materials. Besides that, if there are other things nearby, such as doors and windows, then take them into account in the measurement as well.
2. Cut The Corners At 45 Degree Angles
Installing a corner of rockmount stacked stone can be challenging if you have to cut the panels for fitting. That is why we recommend that you cut corners at a 45-degree angle. If you don’t, the result will be sloppy, and it will look like an amateur has done the work.
3. Start At The Lowest Point
Starting the installation from the wrong point can ruin your entire project. You must start from the bottom and finish each wall one by one. Doing this will guarantee that everything goes as expected.
4. Have Enough Mortar Or Thinset
While your stacked stone outdoor installation, you must ensure you have enough material on your hand to finish the project. If you don’t have enough material, you will have to go back, and this will waste time and effort. That is why you must keep everything you need on hand.
5. Utilize A High Bond Mortar
When installing slate stacked stone, one of the most annoying things is when your veneer panels slip out of alignment when you go to the next one. If you don’t want to face this issue, you can utilize a high-bond mortar. Such mortar dries quickly, so the interlocking panels don’t slip.
6. Consult A Professional
Even if you are doing the stacked stone installation yourself, you can still consult a professional before you begin. They will offer you expert advice that you can implement during the process. As a result, you will end up with the perfect stacked stone installation.
7. Ensure The Wall Is Level
If you install natural stone ledger panels inaccurately, you will notice gaps between each panel. One of the top reasons for this can be that wall may be uneven. That is why you must ensure that the wall is level and it can support the slate stone veneer for the best results.
Final Words
These are the top seven tips you can implement to install natural ledgestone like a professional. It might feel intimidating the first time, but once you get used to it, the installation will become a breeze. Of course, it never hurts to consult a professional for knowledgeable and expert advice about the stacked stone installation.
