Utvendige gule gneiser Z steinpaneler

What makes ZClad different from standard stone cladding?

The Z-shaped interlocking design creates invisible joins between panels. This eliminates the visible seams common with flat-backed stone products. Your installations look like custom hand-laid stone walls, not obviously manufactured panels.​

Can I use ZClad on both interior and exterior projects?

Yes. The natural quartz withstands exterior weather conditions including freeze-thaw cycles, intense sun, and heavy rain. Interior applications work equally well for feature walls, fireplaces, and accent areas. The same product serves multiple project types.​​​

What substrate preparation is required?

The wall surface must be clean, solid, and free from paint, dust, or loose coatings. Concrete blocks, cement board, and properly prepared wood framing with exterior sheathing all work well. The surface must support at least 90kg per square meter.​

Do I need to seal ZClad after installation?

No. Natural quartz stone requires no sealing or special treatments. The material naturally resists moisture, staining, and biological growth. Clients enjoy maintenance-free performance for years.​

How do I calculate the quantity needed for a project?

Measure the wall area in square meters. Divide by 0.36 (the coverage per pack) to get the number of packs needed. Add 10% for cutting and adjustments. Order corner pieces separately based on linear meters of corner height.​

Can ZClad be installed over painted surfaces?

No. Remove all paint, gypsum plaster, and loose coatings down to solid substrate. The adhesive needs direct contact with structural material for proper bonding. Surface preparation is critical for long-term performance.​

What tools do I need for cutting ZClad panels?

A handheld angle grinder with a diamond blade handles most cuts. For high-volume projects, a wet saw with a cutting bench improves speed and accuracy. Cut panels to maintain the Z-profile edge where panels will join together.​

How do corner installations work?

Order corner pieces separately. These L-shaped pieces are designed specifically for outside corners and come pre-formed with the correct angles. Install corners first, then fill in between with standard flat panels.​

What happens if a panel is damaged during installation?

Individual panels can be replaced. Remove the damaged piece, clean the substrate, and install a new panel following standard procedures. The interlocking design allows individual panel replacement without affecting adjacent areas.​

Does ZClad require maintenance after installation?

Minimal maintenance required. Occasional washing with water removes surface dirt. The natural stone resists staining, fading, and weathering without special treatments or sealers. This low maintenance appeals to commercial clients seeking reduced operating costs.​